S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Carefully prise apart the sides of the connector holder in the ends so that the connector can pass by the retaining hooks.
-
Pull out the connector.
-
Position both the green connectors and the red/white (R/W) single cable with the larger cable terminal facing backwards along the cable. Insulate
the cables. Secure the cables using the foam tape from the kit. They must not come into contact with the chassis. The single cable with the smaller
cable terminal should be loose.
-
Connect the red/white (R/W) single cable with the smaller cable terminal to position 8 in the connector.
-
Reinstall the connector in the holder and reinstall the whole unit in the fuse holder.
