volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness for the Radio (Accessory Electronic Module)|Page 15424 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15422
Page 20
background image

Applies to cars up to and including model year -2004 (CH -424999)

-

Angle the dashboard environment panel outwards so that it is possible to insert a couple of fingers between the centre console and the short side of
the dashboard environment panel.

-

Pull the dashboard environment panel downward maintaining the same angle and remove the dashboard environment panel. The panel is well
secured, so some force is required to detach the panel. Unplug the connectors on the reverse side, and place the dashboard environment panel to
one side.

Note! If any of the outer hooks break off, these must be repaired. The method for this can be found in the Workshop Manual in the
section about the dashboard.

Illustration B

Applies to cars from model year 2005- (CH 425000-)

-

Remove the bracket with dashboard environment panel and the radio from the centre console: Pull the lower edge out and downwards until it
releases from the mounting at the upper edge. Then fold backwards.

Note! Do not damage the removed components or the surrounding panels. If necessary, the panel around the gear selector lever can be
removed for additional space. The panel is secured with four catches on the underside along the boot.

-

Unplug the connectors from the radio and dashboard environment panel, and from the telephone keypad if applicable. Place the unit to one side.

Cable Harness for the Radio (Accessory Electronic Module)|Page 15424 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15422