S60 L5-2.4L VIN 64 B5244S6 (2003)
Illustration B
-
Position both the green connectors and the red/white (R/W) single cable with the smaller cable terminal facing backwards along the cable. Insulate
the cables. Secure the cables using the foam tape from the kit. They must not come into contact with the chassis. Single cable with the larger cable
terminal should be loose.
-
Connect the red/white (R/W) single cable with the larger cable terminal to fuse socket 10 on the fuse holder.
-
Install a 10A fuse in fuse holder 10.
-
Reinstall the electronic module.
Applies to cars from model year 2005- (CH 425000-)
-
Press in the catch on the rear brown connector in the cargo compartment fuse holder. Turn up the lock arm as far as possible and pull out the
connector.
