volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness for the Radio (Accessory Electronic Module)|Page 15444 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15442
Page 40
background image

-

Install the console and the Jukebox with four screws, washers and nuts to the underside of the parcel shelf and tighten.

-

Connect the short DIN cable from the kit and the long cable with the green connector in the pre-routed cable harness to the Jukebox adapter cable.

-

Clamp the cables in the body and at the existing cable harnesses with tie straps from the kit. Make sure that the cables do not chafe against sharp
edges in the body.

Connecting to the DVD unit

-

Position the single cables in the routed cable harness backwards along the cable. Insulate and secure them by the cable with foam tape from the kit.
The two green connectors must be loose.

Cable Harness for the Radio (Accessory Electronic Module)|Page 15444 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15442