S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove the screws (1) in the radio bracket (2)
-
Remove the radio bracket including the centre console locker. The radio bracket will not be reused.
Installation
Applies to all models
-
Take out the new radio bracket
-
Slide the radio bracket up so that the groove in the upper edge goes round the upper edge of the centre console. At the same time press the lower
mounting for the radio bracket towards the lower edge of the centre console
-
Tighten the radio bracket using the existing screws.
Illustration A applies to the S60, and V70 (00-)
-
Take out the new mounting bracket for the dashboard environment panel
-
Turn the dashboard environment panel upside down
-
Insert the mounting bracket leg in the holes on the lower side of the dashboard environment panel. Fold the bracket down so that the bracket is
against the reverse of the dashboard environment panel
-
Tighten the mounting bracket at the reverse of the dashboard environment panel. Use two new self-tapping screws (1).
