volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Cable Harness for the Radio (Accessory Electronic Module)|Page 15458 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15456
Page 54
background image

-

Unscrew the two screws in the lower edge.

Note! Reset the CD-mechanism to original position before replacing the unit.

Hold the radio unit in the same position as when installed in the vehicle (tilted 15-20°) as illustrated. See illustration (A).
Reset the CD mechanism by:

-

Switch on the ignition.

-

Disconnect the green connector from the radio/CD player. Wait 5 seconds

-

Reconnect the green connector to the radio/CD player. The CD player has been reset

-

Wait until no sound is heard from the CD mechanism.

Remove the cable harness.
Remove the radio/carphone.

Installing the radio/carphone

Hold the radio unit in the same position as when installed in the vehicle (tilted 15-20°) when connecting the connector.

Install:

In reverse order.

Cable Harness for the Radio (Accessory Electronic Module)|Page 15458 > < Cable Harness for the Radio (Accessory Electronic Module)|Page 15456