S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Tighten the spare wheel using the new securing device from the kit.
-
Remove the rubber washer (1) in the rear cross member behind the spare wheel. The hole is used to secure the subwoofer at the rear edge.
-
If the car has a pre-routed cable harness for the subwoofer, disconnect the connector (1) from the cable harness at the rear cross member and
continue to point 31. If the car does not have a pre-routed cable harness, carry out points 10 to 30 first.