S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Route the ground lead (1) along the cable harness for the fuse holder over the wheel arch and on to the rear ground terminal under the left-hand
seat cushion on the rear seat
-
Clamp the cable at the cable harness for the fuse holder and wiring. Clamp it at the drainage hose. Use the tie straps (2) from the kit as illustrated
-
Hide the ground lead under the insulation panel if possible.
-
Fold the insulation panel out of the way
-
Connect the ground lead (1) to the rear ground terminal (2)
-
Fold the insulation panel back into place
-
Reconnect the battery ground lead
-
Reinstall the protective cover for the battery
-
Reinstall the left-hand side panel
-
Reinstall the rear insulation panels
-
Reinstall the side cushion
-
Fold the seat cushion and backrest back into place
-
Reinstall the folding side panels.
-
Thread the strap (1) from the kit into the jack and tool bag holder (2)
-
Place the tool bag and the jack in the holder. Tighten the tool bag and the jack in place using the strap.