S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Cut out the insulation panel as illustrated.
-
Slacken off the screw (1) a few turns. Remove the two nuts (2) from the holder (3) for the battery
-
Remove the holder
-
Remove the protective cover (4) from the battery
-
Disconnect the battery ground lead.
-
Unscrew the holder for the spare wheel, jack and tool bag
-
Remove the jack and tool bag from the holder (it will not be used again). There is a new holder and securing device for the jack, too bag and spare
wheel in the kit.