S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove the screw (1) in the lower seat belt mounting on the right and left-hand sides in the rear seat. There are new screws in the kit.
-
Remove the screw (1) in the lower seat belt mounting in the centre of the rear seat. A new screw is included in the kit.
-
Pry off the seat belt side pieces (A) from the parcel shelf panel. Use a weatherstrip tool.
-
Insert the seat belt end mountings and side pieces through the holes in the parcel shelf panel (B).
-
Remove the parcel shelf panel to make the holes.