S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Secure the four gray connected connectors around the thick cable harness using their relevant cable ties from the kit.
-
Secure the relay holder with relay and fuse holder with fuse around the thick cable harness.
-
Pull the wiring down to the holder for the main fuses.
-
Collect the excess of the cables under the tail lamp and secure around the existing cable harnesses.
-
Secure the cable behind the load securing eyelet using a cable tie.
-
Make sure that the wiring does not chafe against sharp edges.