S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Reinstall the protective cover and bracket.
-
Secure and torque tighten the screw and nuts to 24 Nm (18 lbf.ft.).
Preparations
Applies to the XC90
Applies to cars with two rows of seats
-
Fold up the center rear floor hatch (1). If the underside of the floor hatch is equipped with a grocery bag holder, the holder is secured with a strap
on both ends of the storage compartment. Detach the straps.
-
Remove the underlying storage compartment.
-
Remove the floor hatch by folding it almost completely closed and pulling it backwards from the mountings until it releases.
Applies to cars with three rows of seats and integrated carrier bag holder on the underside of the center floor hatch
-
Fold up the center rear floor hatch (1).
-
Detach the two straps on the underlying panel. Lift up the rear edge of the panel, fold the floor hatch back towards the panel and lift out the floor
hatch with the panel.
Part 2
Applies to cars with three rows of seats without an integrated carrier bag holder
