S60 L5-2.4L VIN 64 B5244S6 (2003)
-
the rear wheels. Lower the car.
Install new rubber tabs over the four installed screws as follows:
-
Align the rubber tabs (1, 4) edge to edge with the lining mat
-
Compress the rubber tab (2) slightly to align in the cut out
-
Align the rubber tab (3) so that the lower edge is positioned edge to edge with the lining mat. Then cut off the section protruding from the lining
mat - do not remove too much
-
If necessary, cut away the area around the screw heads so that the screws are accessible.
Illustration A applies to installation of the tow hitch
-
Check the function of the detachable tow hitch.
-
Turn the handle (1) clockwise until a click is heard and the indicator pin (2) is in the outer position
-
Install the tow hitch by pressing the tow hitch onto the connection stud (3).
Illustration B applies when locking the tow hitch into place
-
Check that the indicator pin (2) is in the inner position and that the handle (1) is horizontal
-
Turn the lock cylinder (3) to the position illustrated. The plastic cover (4) protects the lock cylinder.