S60 L5-2.4L VIN 64 B5244S6 (2003)
14. Blind rivets (x10).
Note! It is recommended that operations 8, 13, 14 and 15 are carried out by two people.
Cargo compartment, preparations
-
Turn the ignition key to position 0. Remove the ignition key from the ignition switch.
NOTE! Wait at least five minutes before disassembling the connectors or removing other electrical equipment.
-
Connect the cable harness connector for the tow hitch according to point 1 in the Installation Instructions for the appropriate cable harness.
-
Fold up the floor hatch
-
Press the clips in the centre until a "click" is heard. Remove the clips
-
Remove the plastic nut
-
Repeat the operation on the right-hand side.
-
Turn the handle (1) on the right and left-hand sides a quarter turn
-
Fold the side panels inwards. Remove the panels
-
Pull the tailgate sill trim panel (2) forwards on the right and left hand sides until the two clips on each side release. Carefully pull the panel with
some force as it is tightly secured
-
Remove the wiring (3) for the cargo compartment lighting
-
Then pull the sill trim panel straight up until the four clips at the lower edge release. Remove the sill trim panel.
