S60 L5-2.4L VIN 64 B5244S6 (2003)
Storing the tow hitch
Illustration A applies to all cars without Bi-fuel
-
Remove the tow hitch. Place the tow hitch in the protective bag
-
Place the protective bag in the spare wheel as illustrated
-
Lower the tow hitch so that the handle aligns with one of the holes in the rim
-
Thread the strap into the two closest holes in the rim. Route the strap around the tow hitch, between the handle and the tow hitch itself
-
Insert the strap into the tensioner. Tighten the tensioner until the tow hitch is secured.
Illustration B only applies to Bi-fuel cars
Applies to the first time
-
Remove the cover on the storage compartment by the battery
-
Grasp the front edge of the lower section of the compartment. Pull the compartment backwards. At the same time lift the front edge upwards.
Lift up the entire compartment
-
Thread the strap from the tow hitch kit through the groove underneath and up to the top
-
Reinstall the compartment.
Proceed as follows
-
Remove the tow hitch. Place the tow hitch in the protective bag
-
Position the tow hitch to the left in the compartment. Align the tow hitch
-
Tighten the tow hitch properly using the strap. Ensure that the hitch is secure
-
Reinstall the cover on the compartment. Check that it is secure.
Installing the protective cover