S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten.
-
Clamp the cable harness at the tow bar. Tighten the clamp(s) (4).
Installing the connector for fixed/detachable tow bars
Applies to the XC90
Illustration A
-
Install the trailer connector (1). Use the three screws (2) and the nuts (3). Tighten.
-
Pull the cable harness out towards the right along the front edge of the tow bar member.
-
Secure the cable harness with a tie strap on the sides of the tow bar member brackets.
Figure B applies to cars with R-design Skidplate
On cars with Skidplate, the contact shall be turned 90° counter-clockwise in relation to the placement in Figure A.
Steps 7-16 apply to the S60