volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Adapter 7 to 4 Pole Wiring For Towing|Page 16740 > < Adapter 7 to 4 Pole Wiring For Towing|Page 16738
Page 3
background image

-

Turn the knob (1) on the right-hand and left-hand sides a quarter turn.

-

Fold the panels inwards. Lift the panels out.

-

First, pull the trunk lid sill trim panel (2) forwards until the two clips on the right-hand and left-hand sides release. Pull forcefully but carefully
since the panel is fitted tightly. Pull the panel straight up until the four clips in the lower edge release.

-

Remove the wiring (3) for the cargo compartment lighting.

-

Lift out the sill trim panel.

Applies to the S80

-

Fold the carpet to one side.

-

Remove the clips from the lower edge of the folding panel on the left and right-hand sides by pressing in the middle of them until a click is heard.

-

Remove the clips.

-

Place the carpet to one side (1) in the cargo compartment.

-

Turn the clips (2) and fold in the side panels on both sides.

-

Remove the two covers (3) and the screws (4) underneath. Grasp the panel's outer edges (5) and pull the middle inwards so that the clips release at
the sides.

-

Disconnect the connectors (6) for the side lights. Remove the panel by pulling it straight upwards, so that the clips release from the rear member.

Adapter 7 to 4 Pole Wiring For Towing|Page 16740 > < Adapter 7 to 4 Pole Wiring For Towing|Page 16738