S60 L5-2.4L VIN 64 B5244S6 (2003)
Installation
Applies to the V70 and the XC70
-
Take the adapter cable from the kit and connect the towbar wiring female connector (1) to the male connector (2) in the adapter cable.
-
Plug the remaining connectors (3) into each other.
-
Take a cable tie from the kit. Secure the relay holder with relay and fuse holder with fuse, by the towbar wiring.
-
Route the cable from the relay in the adapter cable along the cable harnesses in the rear member, and up to the fuse holder for the main fuses.
-
Secure it using four cable ties from the kit. Ensure that the cables do not rub against sharp edges.