S60 L5-2.4L VIN 64 B5244S6 (2003)
Front Bumper Cover / Fascia: Service and Repair
Casing, Bumper Front, Replacing
Casing, bumper front, replacing
Removing the front bumper and casing
Note! Cars built after week 0048 only have the two upper mounting elements on the bumper.
Remove:
-
Wiper arms (1)
-
Remove the two screws.
Use a 12 mm long socket.
-
Remove the six clips on the upper side of the casing
-
Remove the seven clips on the underneath of the bumper
-
Drill out the four blind rivets from each side where the edge of the fender meets the wheel arch fender liner. The rivets must not be cut off. See
Removing rivet
-
Remove the screw.