S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Position the nuts (1) and the washers (2) above the rear holes in the sub-frame. Position the washers (3) between the sub-frame and the protective
panel. Loosely screw the screws (4) into place
-
Tighten the front screws (5). Tighten to 25 Nm (19 ft.lb)
-
Tighten the rear screws (4). Tighten to 50 Nm (38 ft.lb)
-
Post-tighten the screws after approximately 1 minute so that the materials have time to settle.
