volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Front Subframe|Page 17179 > < Front Subframe|Page 17177
Page 4
background image

-

the fuel line for the engine block heater and the engine block heater (if applicable) on the left side of the sub-frame.

Remove

-

the hose for the EVAP canister in the joint by pulling apart the hose. Pull it forwards under the anti-roll bar and remove it from the snap fastener
on the sub-frame. (Does not apply to Diesel).

Remove

-

the mounting for the exhaust pipe on the bracket

-

the screws holding the exhaust pipe bracket. Disconnect the brake pipe from the snap fasteners on the bracket

-

the bracket.

Front Subframe|Page 17179 > < Front Subframe|Page 17177