S60 L5-2.4L VIN 64 B5244S6 (2003)
INTRODUCTION
-
NOTE! Read through the entire text before carrying out any work.
-
The front page gives the date of this edition and the edition it replaces
-
The second page shows the tools needed for the installation and the contents of the installation kit
-
The illustrations display the procedure in order of operation. The order of operation is repeated in the text section
-
Cut out the text page in order so that the illustrations and text can be followed at the same time.
The text and illustration at point 8b have been changed since the last edition.
Kit contents:
1. Cross member (1X)
2. Screw M14x80 (2X)
3. Nut M14 (2X)
4. Upper bracket (2X)
5. Lower bracket (2X)
6. Sleeve (4X)
7. Screw M12X50 (2X)
8. Screw M12X130 (4X)
9. Reinforcement panel with sleeves (2X)
10. Protective cover, assembly (1X)
11. Belt (1X)
12. Protective bag (1X)
13. Decal (1X)
14. Detachable tow hitch (1X)
15. Blind rivet (10X)
16. Washer (2X)
17. Rubber tab (4X).
Type approval of the tow hitch is in the table on page 2.
Note! A new lining mat is required for cars manufactured up to week 13, 2000. The lining mats are ordered separately for these cars.
It is recommended that operations 6 and 12 are carried out by two people.
Detachable tow hitch
-
Turn the ignition key to position 0
-
Remove the ignition key.
