volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Bag Holder|Page 17515 > < Bag Holder|Page 17513
Page 2
background image

INTRODUCTION

-

NOTE! Read through the whole installation instruction before starting the work.

-

The front page gives the date of this edition and the edition it replaces

-

The second page shows the tools needed for the installation and the contents of the installation kit

-

The illustrations display the procedure in order of operation. The order of operation is repeated in the text section

-

Cut out the text page in order to follow the illustrations and text at the same time.

Bag holder, cargo compartment, parcel shelf

Applies to S40 (04-)

Illustration A

-

Take the rail, the hooks and the end stop from the kit

-

Thread the hooks onto the rail. Insert the end stop

-

Take the two mounting plates and the screws from the kit

-

Mount the plates in the outer holes of the rails. Use the screws. The long section of the mounting plate must point forwards

-

Lift the rail. Insert the mounting plates in the two large rectangular holes on the underside of the parcel shelf.

Illustration B

Bag Holder|Page 17515 > < Bag Holder|Page 17513