S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Remove the existing polystyrene support by the spare wheel.
Illustration A applies to cars equipped with the small temporary spare wheel
-
Install the new polystyrene support by the spare wheel as illustrated. Remove the spare wheel if necessary.
Illustration B applies to cars with a full size spare wheel
-
Remove the existing spare wheel
-
Install the smaller spare wheel and the new polystyrene support as illustrated in illustration A
-
Press the spacer pipe into place with the support plate in the attachment unit.
Installation
-
Place the new combined cargo compartment carpet / carrier bag holder on a flat underlay with the lower side facing upwards. There are two yellow
decals on the left-hand side of the cargo compartment carpet / carrier bag holder.
Illustration A applies to two wheel drive cars
