S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Press a new clip (from the kit) on the end of the net
-
Position the clip in the same way as the first at a distance of 165 mm (6 1/2") between both clips
-
Mark out and drill out the hole according to Net pocket, side panel See: Net Pocket, Side Panel , and continue according to points Net pocket,
side panel See: Net Pocket, Side Panel and Net pocket, side panel See: Net Pocket, Side Panel
-
Remove the end of the net from both clips.
-
Install the clip for the corresponding side in the same way according to points Net pocket, side panel See: Net Pocket, Side Panel - Net pocket,
side panel See: Net Pocket, Side Panel
-
Press the loose end of the net into the clips with the rivets pointing inwards according to point Net pocket, side panel See: Net Pocket, Side Panel
-
Reinstall the side panel. Secure the panel using the clips, plastic nut and the knob.
Panel, A-Post, Replacing
Replacing the A-post panel
As the illustrations in this service information are used for different model years and / or models, some variation may occur. However, the essential
information in the illustrations is always correct.
Removing the A-post panel
Note! There are two types - safety hook or safety clips - of mounting for the panel nearest the headlining.
