S60 L5-2.4L VIN 64 B5244S6 (2003)
Panel, B-Post, Replacing
Panel, B-post, replacing
Removing the B-post panel
Remove:
-
the sill trim panel. See Front door sill trim panel See: Scuff Plate/Service and Repair/Front Door Sill Trim Panel
-
the sill trim panel. See Rear side door sill trim panel, left and right See: Scuff Plate/Service and Repair/Rear Side Door Sill Trim Panel, Left and
Right
-
the end mounting from the front seat seat belt. See Seat belt buckle end mounting See: Restraint Systems/Seat Belt Systems/Seat Belt
Buckle/Service and Repair/Front Seat/Seat Belt Buckle End Mounting , (non-power seats only)
-
the end mounting on the front seat seat belt on power seats: Release the catches from underneath.
Move the seat as far forward as possible.
Detach the weatherstrip at the panel: Pull straight to the side.
Pull the lower section of the panel inwards into the car.
Pull straight downwards, press the steel clips outwards (both sides) and releases the insert at the top edge.
Pull downwards until the panel releases.
Lift upwards until the panel is free
Remove the seat belt cover
Thread the seat belt through the panel.
Installing the B-post panel
Install:
In reverse order.
B-post ventilation vent
Remove. See Removing the B-post panel.