S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Install the new trim strip on the door panel. Press the trim strip into place
-
Create a counterhold on the trim strip using a soft, clean rag. This is to prevent damage. At the same time install locking washers on the lugs (1) on
the reverse of the door panel. Securely press the locking washers into place as illustrated.NOTE: Do not damage the door panel and trim strip.
-
Connect the connector to the door control module. Reinstall the mechanical cable for the door opener
-
Reinstall the door panel, according to point 11.
Mounting the trim strip on the cover for the glove compartment:
-
Open the cover for the glove compartment
-
Remove the four screws (1) holding the trim strip (2) at the cover. Install the new trim strip (from the kit) in place. Tighten at the cover using the
four screws.
Waste Paper Basket
Waste paper basket
