S60 L5-2.4L VIN 64 B5244S6 (2003)
Hint: Apply soap to the rubber strip to make it easier to install the storage compartment in the centre console locker.
-
Press down the storage compartment in the centre console locker
-
Install the two short screws (1) from the kit in the front holes in the storage compartment. Tighten the screws a few turns. Use an angled torx
screwdriver
-
Insert the two remaining screws through the rear holes in the storage compartment and through the two spacers
-
Insert the threaded plate underneath the panel where the spring nuts were removed
-
Install the screws in the nuts on the threaded plate. Tighten the screws. Use an angled hex socket
-
Tighten the front screws
-
Reinstall the holder with the ashtray.
Applies to the V70/V70 XC
Applies to the V70 XC
-
Remove the panel in front of the gear selector lever. Pry off the panel using a weatherstrip tool.
Applies to the V70 XC
