S60 L5-2.4L VIN 64 B5244S6 (2003)
Key: Testing and Inspection
Ignition Key/Remote Control, Adding/Replacing/Erasing
Ignition key/Remote control, adding/replacing/erasing
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Ignition key/Remote control, adding/replacing/erasing
Caution! When replacing an ignition key or remote control, the new unit must be programmed.Both software and the code on the packaging
are required to add a new remote control.Only the software is required to erase a remote control.Only the software is required to add an
ignition key.
Ignition key programming/erasing
Order the applicable software.
Remote control programming/erasing
Order the applicable software.
Finishing
Check the function after programming an ignition key or remote control.
Model year 2004
Note! 2004 sees the introduction of an ignition key integrated with the remote control.
Removing keys from the remote control
Fold out the key and remove the battery cover.
