S60 L5-2.4L VIN 64 B5244S6 (2003)
Illustration B applies to the installation of ISOFIX on the side where the double buckle for the car seat belt is positioned
Note! The geometry of the seat belt in the S80 is reversed compared with the V70 (00-). The seat belt double buckle is positioned on the opposite
side.
The operation is carried out on both sides
-
Remove the screw (1). At the single buckle - remove the end mounting (2) from the centre seat belt
-
Replace the screw (1) with the new screw from the kit
-
Remove the perforated section of the insulation from under the ISOFIX bracket (3).This is to expose the existing stud (5)
-
Position the Isofix bracket (3) as illustrated
-
Install the screw (1). At the single buckle - also install the end mounting (2) for the centre seat belt
-
Install the nut (4) and washer (6) from the kit
-
Tighten the screw (1). Tighten to 40 Nm (30 ft-lb). Then tighten the nut (4). Tighten to 30 Nm (22 ft.lb).
Applies to the V70 (00-)
-
Fold the rear seat cushion back into place.
Applies to S60 and S80
-
Reinstall the rear seat cushion.
Mounting Kit For the Front Child Seat
Mounting kit for the front child seat
