volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Outer Head Restraint|Page 18149 > < Outer Head Restraint|Page 18147
Page 11
background image

Install and press the clothes holder into place.

Hint: Tap it gently using a hammer to ensure it is properly secured.

Install the head restraint. Press the head restraint down until the catches engage.

Note! Lift in the head restraint. Check that it cannot be moved upwards.

Upholstery Head Restraint Front

Upholstery head restraint front

Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.

Preparations

Note! To carry out this work a zip fastener is required. This is not included in the upholstery but is ordered separately. 6 mm zip fastener part
number: 3533976 is used and in some cases zip fastener 4 mm, part number: 9459316

Removing upholstery

Outer Head Restraint|Page 18149 > < Outer Head Restraint|Page 18147