S60 L5-2.4L VIN 64 B5244S6 (2003)
Installing the front height adjustment motor
Install:
-
the two screws
-
a new tie strap
-
the connector
-
the seat. See Lifting seats in and out See: Service and Repair/Removal and Replacement.
Removing the rear height adjustment motor
Remove the seat from the car. See Removing power seats, tilting See: Service and Repair/Removal and Replacement.
Disconnect the connector at the control module or the connector at the motor.
Note! Carefully release the catches on the connector.
Remove the two screws.
Installing the motor for rear height adjustment
Install:
-
the two screws
-
the connector
-
the seat. See Lifting seats in and out See: Service and Repair/Removal and Replacement.
Rear Height Adjustment Motor
Rear height adjustment motor
Replacing the rear height adjustment motor
Remove
-
the seat from the car and the bracket. See Lifting seats in and out See: Service and Repair/Removal and Replacement
-
the connectors. See Connector See: Service and Repair/Removal and Replacement/Front Seat/Second Generation Power Seats/Connector.
-
the two screws (seat belt buckle).
