S60 L5-2.4L VIN 64 B5244S6 (2003)
-
the two half moon clips from each lateral channel.
Replace the upholstery.
Install:
In reverse order.
Position and measure the upholstery. Ensure that the upholstery is correctly positioned before securing.
Upholstery Back Rest, Replacing
Upholstery back rest, replacing
Preparatory work
Removing components
Remove:
-
the seat from the car. See Lifting the front seats in and out See: Service and Repair/Removal and Replacement
-
the lumbar support knob according to Lumbar support adjustment knob, replacing See: Service and Repair/Removal and Replacement/Front
Seat/Lumbar Support Adjustment Knob, Replacing
-
the side piece: Pull straight out
-
the backrest adjustment knob. See Backrest adjustment knob See: Seat Back/Service and Repair/Front Seat/Backrest Adjustment Knob.
Removal
Removing upholstery
Fold the backrest or position the backrest in the forward folded position.
Slacken off the tension in lumbar support.
Remove the five half moon clips at the bottom edge of the backrest.
Remove the upholstery to the first lateral channel, two half moon clips for each front-rear channel.
Remove the upholstery completely.
Remove a half moon clip from each side in the front-rear channel.
Remove three half moon clips in the first lateral channel and two half moon clips in the upper channel.
