S60 L5-2.4L VIN 64 B5244S6 (2003)
Install the two 170 mm edge trims (1) on the vertical panel edges.
Start at the top of the panel edge.
Installing upholstery
Install:
In reverse order.
Position and measure that the upholstery is correctly positioned before securing.
Protective Pad
Protective pad
Replacing protective pad
Carry out Upholstery back rest, replacing See: Upholstery Back Rest, Replacing.
Fold out and release the protective pad and turn the backrest adjustment and lumbar adjustment knobs.
Press out the clip in the reverse of the protective pad.
Replace protective pad.
Install:
In reverse order.
Upholstery Head Restraint Front
Upholstery head restraint front
Note! The illustrations in this service information are used for different model years and/or models. Some variation may occur. However, the
essential information in the illustrations is always correct.
Preparations
Note! To carry out this work a zip fastener is required. This is not included in the upholstery but is ordered separately. 6 mm zip fastener part
