S60 L5-2.4L VIN 64 B5244S6 (2003)
Note! Damaged foam filling must be replaced. This to guarantee function. This also applies to damage caused by cracks in the seat back
and seat frame.
Installing heater pads
Positioning the heater pad
Caution! Ensure that the heater pad is correctly positioned so that the half moon clips can be secured clear of the heater elements and the
surface of the heater pad.
-
Position the heater pad in the correct position. Do not remove the backing from the adhesive surfaces
-
Secure one half of the heater pad
-
Bend up the other half of the heater pad
-
Pull the backing (or part of the backing) off the adhesive surface closest to the center of the section of the heater pad that is bent up
-
Carefully bring the adhesive surface down onto the foam filling. Work with small sections at a time. Start from the center and work out towards the
edges
-
Continue in the same way with the other adhesive surfaces.
Positioning in relation to the channels in the foam filling
