S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Ignition off
-
Disconnect connector from the seat heater module
-
Ignition on.
Check the voltage between seat heater (9/12) for left seat and (9/13) for right seat connector terminal #1 and ground.
Other information:
-
To connect the breakout box, see Connecting the breakout box See: Body Control Systems/Testing and Inspection/Pinout Values and Diagnostic
Parameters/Connecting the Breakout Box/Connecting the Breakout Box, Central Electronic Module (CEM)
-
For information about signals, see Signal specification See: Body Control Systems/Testing and Inspection/Pinout Values and Diagnostic
Parameters.