S60 L5-2.4L VIN 64 B5244S6 (2003)
Seat Latch: Testing and Inspection
Whiplash Unit, Checking
There are two versions of deformation element. The first version is used in cars up to the following chassis number: -1499
The second version is used in cars with the following chassis number: 1500-
Checking the WHIPS system, version one
NOTE: The WHIPS system must be checked after every collision
Fold or angle the backrest forward.
Lift the upholstery/impact protection at the end mounting.
Check on the outside that the green indicator pin (G) is intact.
Gently pull the indicator pin to check that it is in position and is undamaged. If the indicator pin is missing or deformed, the deformation element must be
replaced.
Checking the WHIPS system, version two
NOTE:
-
The WHIPS system must be checked after every collision
-
The below figure shows the left-hand side mounting. The right-hand side is the mirror image.
The nut always faces the center of the seat.