S60 L5-2.4L VIN 64 B5244S6 (2003)
-
Raise the car.
-
Remove the rear wheels.
-
Carefully drill away the rivets retaining the fender liner and bumper cover. Use a - 6 mm (1/4") drill bit. Ensure that no plastic components are
damaged.
-
Remove the remains of the rivets.
Installation
-
Remove the plastic cord holding both the mudflaps together.
-
Install the mudflaps and rivet the mudflaps securely in the fender liner and the bumper cover.
-
Reinstall the wheels and tighten to 110 Nm (83 ft. lbf).
-
Lower the car.
