S60 L5-2.4L VIN 64 B5244S6 (2003)
Center the control module on the ABS hydraulic modulator valves before the valves are pushed into place.
Install:
-
the control module. Tighten to 1.8 Nm
-
the connectors for the pump motor and the control module
-
the air cleaner (ACL) housing. See Brake pipe master cylinder / ABS unit, replacing, B5254T2 See: Hydraulic System/Brake Hose/Line/Service
and Repair/Brake Pipe Master Cylinder / ABS Unit, Replacing
-
the integrated relay / fusebox. See Hydraulic unit, replacing See: Hydraulic Control Assembly - Antilock Brakes/Service and Repair.
Function test
See Wheel sensor, front, replacing See: Wheel Speed Sensor/Service and Repair/Wheel Sensor Front, Replacing.
Use VIDA vehicle communication to calibrate the control module.
