S60 L5-2.4L VIN 64 B5244S6 (2003)
Install:
-
the brake pedal in its bracket and the screw (1)
-
the screw (2). Counterhold the nut (3). Tighten the screws. Tighten to 40 Nm.
Install the push rod and the clip on the brake pedal
See Bushing, brake pedal, replacing, AW50/51 AWD, R.H.D, AW55-50/51SN, R.H.D See: Hydraulic System/Brake Master Cylinder/Service and
Repair/Bushing, Brake Pedal, Replacing.
Install the relay box in its bracket. Install the soundproofing panel
See Bushing, brake pedal, replacing, AW50/51 AWD, R.H.D, AW55-50/51SN, R.H.D See: Hydraulic System/Brake Master Cylinder/Service and
Repair/Bushing, Brake Pedal, Replacing.
