S60 L5-2.4L VIN 64 B5244S6 (2003)
Clean the components in denatured alcohol.
Check the components for wear, damage, cracks and rust. Replace components if necessary.
Remove the sealing ring. Use weatherstrip tool 981 4071 STRAIGHTENING TOOL See: Tools and Equipment/981 4071 Straightening Tool or similar
so as not to damage the edges of the groove.
Remove the rubber sleeves.
Check the rubber sleeves of the locating pins. Replace if necessary.
Always replace the sealing ring and dust boot when installing. Take particular care to clean the ducts and the grooves for the O-ring and dust boot.
If the cylinder is badly marked, scratched etc., replace the complete caliper.
Remove minor rust deposits using fine sandpaper.
Check the bleed nipple, replace as necessary.
Install the piston in the brake caliper