volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Brake Disc Rear, Calibrating|Page 9034 > < Brake Disc Rear, Calibrating|Page 9032
Page 5
background image

Rotate the brake disc.
Note the test gauge run-out. Brake disc lateral run-out must not exceed 0.050 mm.
If lateral run-out exceeds the value, replace the brake disc.  See: Brake Disc Rear, Replacing

Finishing

Note! For tightening torques, see: Tightening torque See: Specifications/Tightening Torque.

Remove the test equipment

Install the caliper holder and the brake caliper. Use new screws on the caliper holder.
Tighten. See: Tightening torque See: Specifications/Tightening Torque.

Install the wheel

 Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.

Brake Disc Rear, Calibrating|Page 9034 > < Brake Disc Rear, Calibrating|Page 9032