S60 L5-2.4L VIN 64 B5244S6 (2003)
Install:
-
the brake hose (1) to the caliper. Tighten. See: Tightening torque See: Specifications/Tightening Torque
-
the brake pipe (2) in the hose. Tighten. See: Tightening torque See: Specifications/Tightening Torque. Check that the hose is not twisted
-
the bracket (3).
Top up and bleed the braking system. See: Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake System,
Bleeding (Using Bleeding Unit).
Install the wheel. See: Installing wheels See: Maintenance/Wheels and Tires/Wheels/Service and Repair.
Brake Pipe From Hydraulic Unit / Front Wheel / Junction, Replacing
Brake pipe from hydraulic unit / front wheel / junction, replacing
Preparation
Disconnect the battery lead
See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.
Preparations when replacing brake pipes (applies to all brake pipes)
Switch off the ignition. Collect the brake fluid
See Replacing the front brake calipers, B5244T5, B5254T2 See: Brake Caliper/Service and Repair/Removal and Replacement/Replacing the Front
Brake Calipers.
Removing the integrated relay / fusebox
