S60 L5-2.4L VIN 64 B5244S6 (2003)
Install:
-
the cable holder. Tighten the nuts, Tighten to 10 Nm
-
the positive cable and integrated relay / fusebox nut. Tighten to 25 Nm
-
the screw on the clamp around the positive cable
-
the plastic cap at the positive cable.
Install the air cleaner (ACL) housing
Connect all the air hoses and connectors to the air cleaner (ACL) housing.
Tighten the hose clamp.
Fold the air intake in under the front cover plate.
Locate it in its mounting and press it into place.
The positioning of the air intake can be seen through an oblong hole in the front cover plate.
Fill and bleed the brake system
Remove the pedal jack.
Fill and bleed the brake system. See Brake system, bleeding (using bleeding unit) See: Brake Bleeding/Service and Repair/Brake System, Bleeding
(Using Bleeding Unit).
Checking for air in the brake system and for brake fluid leakage
