S60 L5-2.4L VIN 64 B5244S6 (2003)
Turn the brake pipe to the right under the rubber parking brake bellows and down between the bodywork and the fuel lines.
Install the new brake pipe
Note! Tape the ends of the pipe before installing the new brake pipe.
Thread the brake pipe between the bodywork and the fuel lines.
Continue under the parking brake cable and over the muffler down to the other brake pipe.
Remove the masking tape.
Assemble the brake pipes. Tighten to 14 Nm.
Assemble the brake pipe and the brake hose in the bracket. Tighten to 18 Nm.
Install the bracket, mounting plate and brake pipe
