S60 L5-2.4L VIN 64 B5244S6 (2003)
Preparation
Disconnect the battery lead
See Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting
Preparations when replacing brake pipes (applies to all brake pipes)
Switch off the ignition. Collect the brake fluid
See Replacing the front brake calipers, B5244T5, B5254T2 See: Brake Caliper/Service and Repair/Removal and Replacement/Replacing the Front
Brake Calipers
Remove the air cleaner (ACL) housing
See Brake pipe master cylinder / ABS unit, replacing, B5254T2 See: Brake Pipe Master Cylinder / ABS Unit, Replacing
Remove the integrated relay / fusebox. Remove the connector for the ABS unit
Remove:
-
the screw for the bracket for the integrated relay / fuse box. Lift it up and put to one side. Tie it up using an electric cable
-
the connector for the ABS control module.
Replacing the front left brake pipe
Clean around the brake pipe on the ABS hydraulic modulator. Remove the brake pipe from the ABS hydraulic modulator and the clips