S60 L5-2.4L VIN 64 B5244S6 (2003)
Lift:
-
the sub-frame. Use the previously installed screws999 5517 SCREW LEFT See: Tools and Equipment/999 5517 Screw Left and999 5518
SCREW RIGHT See: Tools and Equipment/999 5518 Screw Right. Check that the steering shaft joint does not catch in the lead-in the bodywork
when the sub-frame is lifted
-
the rear edge of the sub-frame (1) halfway along the tool's screw length. Now repeat at the front of the sub-frame (2)
-
the sub-frame until its bushings are only a few millimeters from the frame members in same order as above.
Note! It is important that sub-frame is lifted in the correct order.
Install the steering components
