S60 L5-2.4L VIN 64 B5244S6 (2003)
Disconnect the radiator and the charge air cooler (CAC) firstly from the left and then from the right-hand side by removing the two screws.
On the right-hand side, press the cable duct and the compressor hose towards the engine. At the same time release the radiator and charge air cooler
(CAC) downwards on the right-hand side. Then release the radiator and charge air cooler (CAC) on the left-hand side. Ensure that the mounting for the
radiator and charge air cooler (CAC) passes the AC pipe.
Disconnect the hose from the radiator to the expansion tank.
Remove the radiator / charge air cooler (CAC).
Installation
Installing the radiator and charge air cooler (CAC)
Hold the radiator unit. Secure the hose from the expansion tank to the radiator. Use a new clamp.
Check that the 2 plastic nuts are in position on the radiator.
Lift up the radiator and charge air cooler (CAC) on the left-hand side. Ensure that the mounting for the charge air cooler (CAC) passes above the AC
pipe. Lift the right-hand side while pressing the cable duct and the compressor hose towards the engine.
Thread the screws for the radiator and charge air cooler (CAC) into the member.
Connect the connector to the right-hand side of the condenser.
