volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Water Pump|Specifications|Page 4073 > < Thermostat|Page 4069
Page 1
background image

Water Pump: Specifications

Install:

-

a new gasket

-

a new pump.
Tighten the screws crosswise.............................................................................................................................................................17 Nm (12.5 lb.ft)

Secure the eccentric and tighten the center screw........................................................................................................................................20 Nm (14.8 lb.ft)

Upper and Front camshaft belt cover. Tighten...............................................................................................................................................12 Nm (8.9 lb.ft)

Cross member. Tighten the screws at the suspension turret.........................................................................................................................50 Nm (36.9 lb.ft)
Screw for the engine bracket. Tighten..........................................................................................................................................................80 Nm (59.0 lb.ft)

Water Pump|Specifications|Page 4073 > < Thermostat|Page 4069