volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing|Page 3434 > < Camshaft Control (CVVT)|Page 3431
Page 1
background image

Variable Valve Timing Actuator: Service and Repair
Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing

Camshaft seal/variable valve timing (VVT) unit, replacing

Special tools:

999 5452 CAMSHAFT ADJUSTMENT TOOL See: Tools and Equipment/999 5452 Camshaft Adjustment Tool 
999 5651 Extractor  See: Tools and Equipment/999 5651 Extractor 
999 5719 Drift  See: Tools and Equipment/999 5719 Drift 
999 5718 Drift  See: Tools and Equipment/999 5718 Drift 
999 5474 RADIATOR PROTECTION See: Tools and Equipment/999 5474 Radiator Protection 
999 5451 ADJUSTMENT TOOL See: Tools and Equipment/999 5451 Adjustment Tool 
999 5919 PULLER  See: Tools and Equipment/999 5919 Puller 
999 5450 PUNCH  See: Tools and Equipment/999 5450 Punch 

Note! As the illustrations in this service information are used for different model years and / or models, some variation may occur. However,
the essential information in the illustrations is always correct.

Removal

Caution! There are a number of versions of the variable valve timing unit. Therefore it is extremely important to always read the information
referring to the engine variant/model year to be remedied.

Removing the camshaft seal

Note! Crankshaft and camshafts must not be turned more than is stated in the method description.If the shafts are turned in any other way the
valves may be damaged.

Remove:

-

the cable from the battery negative terminal.

First read: Battery, disconnecting See: Starting and Charging/Battery/Service and Repair/Procedures/Battery, Disconnecting.

-

the cross stay between the suspension turrets

-

the upper timing belt cover

-

the cover over the ignition coils

-

the inlet hose between the air cleaner (ACL) and throttle body (TB)

-

the upper and lower engine stabilizer brace

-

the camshaft position (CMP) sensor housing

-

the trigger wheel

-

the servo reservoir and the expansion tank. Lift them up and place them on top of the engine

Warning! Ensure that no power steering fluid is spilled. Extremely flammable.

-

the auxiliaries belt

-

the front timing belt cover.

Position the engine according to the marking

Camshaft Seal/Variable Valve Timing (VVT) Unit, Replacing|Page 3434 > < Camshaft Control (CVVT)|Page 3431